L2546 LED 2.5mm Pitch Connector

Send Inquiry
L2546 LED 2.5mm Pitch Connector
Details
Pitch: 2.5mm
The L2546 is a 2.5 mm pitch LED connector built as a 90° long bent-pin DIP header for through-hole soldering. The extended pin length is the point of the design: it gives a larger soldered surface and stronger mechanical anchoring on the PCB, which is what keeps the connection intact under vibration and cable pull.
Category
LED Bulb Connector
Share to
Description

2.5mm LED Connector, 90° DIP Header (L2546)

The L2546 is a 2.5 mm pitch LED connector built as a 90° long bent-pin DIP header for through-hole soldering. The extended pin length is the point of the design: it gives a larger soldered surface and stronger mechanical anchoring on the PCB, which is what keeps the connection intact under vibration and cable pull. This makes the connector well suited to luminaires with limited internal space where the board must be wired at the edge. It is rated at 1 A / 250 V and covers -25 °C to +105 °C, a typical operating envelope for LED lighting.

A long bent-pin header only works if the pins are straight and the bend geometry is consistent - bent or twisted pins break through-hole insertion on the line and cause solder defects. We stamp the pins in progressive dies and control the bending process so the pin grid stays true, and the gold/tin plating is applied by qualified suppliers to keep solderability stable over time. For customers who need a different pin length or a specific circuit count, we confirm the sample from the drawing before production.

14

 

Specifications

 

 

Parameter

Specification

Pitch

2.5 mm

Rated Current

1 A AC/DC

Rated Voltage

250 V AC/DC

Insulation Resistance

≥ 1000 MΩ

Contact Resistance

≤ 20 mΩ

Withstand Voltage

500 V AC/min

Temperature Range

-25 °C to +105 °C

Mounting

90° DIP through-hole, long pins

 

Applications

 

LED strip modules

The right-angle format lets the cable exit at the board edge, which suits slim strip housings.

Landscape lighting

Strong solder joints resist the vibration and pull forces common in outdoor installations.

Indoor and outdoor lighting modules

Through-hole anchoring is more robust than SMT for products that will be handled repeatedly.

Board-edge wiring

The 90° layout simplifies routing in fixtures where vertical space is limited.

 

Customization

 

 

  • Pin count and pin length can be adjusted to the PCB thickness and fixture layout.
  • Contact plating in gold or tin.
  • Housing material can be selected for temperature requirements.
  • OEM/ODM from drawings; samples confirmed before production.

 

Packaging & Transportation

 

 

The L2546 is packed in antistatic trays or tubes suitable for through-hole parts, then in five-layer corrugated cartons labeled with model, quantity and batch, and palletized with stretch film. Recommended storage is 15-25 °C, relative humidity below 60%. Domestic full-truckload or LTL, international express (UPS, DHL, FedEx, TNT), air and sea shipping available with tracking, batch traceability and COC.

1

 

Frequently Asked Questions
 
 

Q1. Why choose a through-hole DIP version instead of SMT?

+

-

Through-hole soldering creates a stronger mechanical anchor on the PCB, so it is preferred where the connector will see vibration, cable pull or repeated handling.

Q2. Can the pin length be customized?

+

-

Yes. Pin length and circuit count can be adjusted to the PCB thickness and fixture layout; we confirm the sample before mass production.

Q3. What is the MOQ?

+

-

The standard MOQ is one set and is negotiable per product; different models can be combined in one order.

 

Hot Tags: l2546 led 2.5mm pitch connector, China l2546 led 2.5mm pitch connector manufacturers, suppliers, factory

Send Inquiry